If abnormal signal of CMPS is detected, ECM sets DTC P034100. This fault might be caused by poor connector connection, defected sensor or tone-wheel.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty CMPS circuit 3. Defected tone-wheel 4. Defected CMPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Abnormal CMPS signal is detected | ||
Detecting Time |
•
- | ||
Fail Safe | Engine Off |
•
No | |
EGR Off |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
On | ||
