If output control PWM signal is out of specification or E-VGT position is not reached at target position for 2 sec., ECM sets DTC P25630000.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty control circuit of E-VGT control actuator 3. Stucked E-VGT control actuator | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Output control PWM signal is out of specification
•
E-VGT position is not reached at target position | ||
Detecting Time |
•
2 sec | ||
Fail Safe | Engine OFF |
•
No | |
EGR OFF |
•
Yes | ||
Torque Limit |
•
Yes | ||
MIL |
•
On | ||
