If A/T related fault is detected, ECM sets DTC P07000000. This fault is caused by fault on A/T system.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitorinig | 1. Poor connector connection 2. Fault on A/T system | |
Enable Conditions |
•
Engine running | ||
Threshold Value |
•
MIL Lamp "ON" request from the TCU | ||
Diagnostic Time |
•
- | ||
Fail Safe | Engine OFF |
•
No | |
EGR Off |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
On | ||
