Ignition switch "OFF"
Refer to "Shop Manual" and remove fuel filter assembly. The filter must be kept in vertical to avoid spills.
Remove water in fuel sensor from the filter and pour the fuel in the clean container.
Has any water presence in the fuel?
![]() | ▶ Check for odometer and filter usage duration. ▶ If too much water is presence in the fuel, refer to "Shop Manual" and inspect the fuel tank. Clean or replace the fuel tank as necessary. ▶ If no problems were found with the circuits or connectors, replace the fuel filter and go to "Verification of Vehicle Repair" procedure. |
![]() | ▶ Carefully re-do this troubleshooting guide steps. ▶ If no problems were found with the circuits or connectors, replace the water in fuel sensor and go to "Verification of Vehicle Repair" procedure. |
O-ring must be change with new one, when replacing the fuel filter.