If the output voltage of EGTS #2 is above threshold value for more than 3 sec., ECM sets DTC P247100. This fault might be caused by open in signal circuit of EGTS #2.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Short to ground in signal circuit of EGTS #2 2. Defected EGTS #2 | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Output signal is below threshold value
•
Short to ground in signal circuit | ||
Detecting Time |
•
3 sec. | ||
Fail Safe | Engine OFF |
•
No | |
EGR OFF |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
On | ||
