If output signal voltage of DPS is below threshold value (850mV) for more than 0.6 sec., ECM sets DTC P24540000. This fault might be caused by short to ground in signal circuit of DPS.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Short to ground in signal circuit of DPS 3. Defected DPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Output signal is below threshold value (850mV) | ||
Detecting Time |
•
0.6 sec | ||
Fail Safe | Engine OFF |
•
No | |
EGR OFF |
•
No | ||
Torque Limit |
•
Yes | ||
MIL |
•
Blink | ||
