If output signal voltage of FTS is higher than maximum threshold value (3204mV) for more than 1 sec., ECM sets DTC P018300. This fault might be caused by open/short to power in signal circuit or open in ground circuit of FTS.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Voltage Monitoring | 1. Open or short to power in signal circuit FTS 2. Open in ground circuit of FTS 3. Defected FTS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Ouput signal is higher than threshold value (3204mV)
•
Open in signal circuit | ||
Detecting Time |
•
1 sec | ||
Fail Safe | Engine OFF |
•
No | |
EGR OFF |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
On | ||
