If output signal voltage of DPS is above threshold value (4721mV) for more than 0.6 sec., ECM sets DTC P24550000. This fault might be caused by short to power in signal circuit of DPS.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Short to power in signal circuit of DPS 3. Open in ground circuit of DPS 4. Defected DPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Output signal is above threshold value (4721mV) | ||
Detecting Time |
•
0.6 sec | ||
Fail Safe | Engine OFF |
•
No | |
EGR OFF |
•
No | ||
Torque Limit |
•
Yes | ||
MIL |
•
Blink | ||
