When the TCM cannot read the data from the ESP through the CAN-BUS line, the TCM sets this code.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check the signal | 1. Faulty in CAN Line 2. Faulty in TCM 3. Faulty in ESP |
Enable Conditions |
•
Battery Voltage is above 10V
•
Time passed from IG-On is higher than 0.5sec | |
Threshold Value |
•
Not Receive a message from CAN MI-COM | |
Detecting Time |
•
More than 2 second | |
Fail Safe |
•
Normal Driving |
