If output signal of APT is below minimum threshold value for more than 3 sec., ECM sets DTC P053200. This fault might be caused by short to ground or open in signal circuit or open in power circuit of APT.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Open in power circuit of APT 3. Short to ground or open in signal circuit of APT 4. Defected APT | |
Enable Conditions |
•
Engine running | ||
Threshold Value |
•
Output signal is below threshold value | ||
Diagnostic Time |
•
3 sec | ||
Fail Safe | Engine OFF |
•
No | |
EGR Off |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
Off | ||
