D04

Driver door module (Without IMS)

D05

Driver door module (With IMS)

D12

Joint connector

D13

Joint connector

D14

Left door unlock switch

D15

Right door unlock switch

D29

Assister door module (Without IMS)

D35

Left rear door lock actuator

D36

Right rear door lock actuator

E08

DRL control module

E12

Hood switch

E14

Siren

M01-1

Multifunction switch

M04

Multipurpose check connector

M33-1

ETACM

M33-2

ETACM

M33-3

ETACM

M44

Hazard relay

M99

Joint connector

R07

Trunk unlock switch

R08

Trunk lid solenoid

I/P-B

I/P-P

JE01

JM09

MD01

MD02

MD03

MD04

MM01

MM02

MR01

G01

G03

G05

G07

G08

G09

Circuit Description

The ETACM controls the keyless entry & burglar alarm system.

Burglar Alarm Operations When the ETACM receives abnormal input signals (for instance, hood switch signal, left/ right door unlock switch signal, trunk unlock switch signal, etc.), the hazard relay coil is energized through the ETACM and battery voltage is supplied to the turn signal lamps. And theETACM controls the siren.

Keyless Entry Operations When the ETACM receives code signals from the keyless entry remocon, the ETACM compares the received code signals with memorized code. If the cods are aligned, the ETACM sends signal to the door modules and turn signal lamps. According to the signals, the turn signallamps are flashed serveral times and the doors are opened.