C09

Transaxle range switch (3.0L/3.5L)

C109

Transaxle range switch (2.0L/2.5L)

M03

Ignition switch

M33-3

ETACM

EE01

JC01

JC101

I/P-H

IP-P

JM09

G11

G116

Circuit Description

Battery voltage is applied at all times from the positive battery terminal to the ignition switch and the normally open start relay contacts. When the ignition switch is turned to START and the transaxle range switch (automatic transaxle) is in P/N position or the clutch pedal position switch (Manual transaxle) is closed, battery voltage is applied through fuse 32 to the start relay coils. The start relay coils energize, the start relay contacts close, and battery voltage is applied to the start solenoid. The motor engages tostart the engine.