E05

Left front fog lamp

E08

DRL control module

E24

Right front fog lamp

I08-2

Instrument cluster

M01-1

Multifunction switch

M08

Joint connector

M25

Rear fog lamp switch

M33-1

ETACM

M33-2

ETACM

M33-3

ETACM

M45

Rear fog lamp relay

R04

Left rear fog lamp (EC)

I/P-B

I/P-H

I/P-P

JE01

JM09

MI01

MI02

MM02

MR01

G01

G02

G03

G04

G06

G08

Circuit Description

FRONT FOG LAMPS OPERATION

When the Light switch in PARK or HEAD, the tail lamp relay coil is energized through the ETACM (Without DRL)/ DRL control module(With DRL) and battery voltage is applied to the fog lamp relay from the closed contactof the tail lamp relay.

When the fog lamp switch in ON, ground is provided to the coil of the fog lamp relay. Battery voltage from the fog lamp fuse is then provided to the LEFT/RIGHT front fog lamps through the closed contact of the fog lamprelay. The LEFT/RIGHT front fog lamps light.

REAR FOG LAMPS OPERATION

When the light switch in PARK or HEAD, the tail lamp relay coil is energized through ETACM and battery voltage is applied to the closed contactof the tail lamp relay.

1. The Light Switch in PARK.

When the fog lamp switch ON and the rear fog lamp switch ON, the rear fog lamp relay coil is energized through the ETACM. Battery voltage is applied to the left rear fog lamp through closed contact of the rear fog lamp relayand the rear fog lamps light.

2. The Light Switch in HEAD.

When the rear fog lamp switch ON, the rear fog lamp relay coil is energized through the ETACM. Battery voltage is applied to the left rear fog lamp through closed contact of the rear fog lamp relay and the rear fog lampslight.