Components | Location reference-page | ||
C44-1 | E/TCM (3.0L/3.5L) | ||
C44-2 | E/TCM (3.0L/3.5L) | ||
C44-3 | E/TCM (3.0L/3.5L) | ||
C46 | Engine control relay (3.0L/3.5L) | ||
C144-4 | ECM (2.0L/2.5L) | ||
C146 | Engine control relay (2.0L/2.5L) | ||
E03 | Ambient temperature sensor | ||
E04 | A/C compressor (2.0L/2.5L) | ||
E04-1 | A/C compressor (3.0L/3.5L) | ||
E07 | Triple switch | ||
E19 | AQS sensor | ||
I01 | Blower motor | ||
I02 | High blower relay | ||
I03 | Intake actuator | ||
I04 | Power transistor | ||
I08 | Evaporator sensor | ||
I11 | Temperature actuator | ||
I12 | Photo sensor | ||
I17-1 | A/C control module | ||
I17-2 | A/C control module | ||
I19 | Mode actuator | ||
I20 | Joint connector | ||
I22 | Joint connector | ||
I24 | Rear vent actuator | ||
M24 | Blower relay | ||
M33-3 | ETACM | ||
Connectors | |||
JC01 | |||
JC101 | |||
JE01 | |||
I/P-B | |||
I/P-E | |||
I/P-J | |||
I/P-K | |||
JM09 | |||
MI02 | |||
MI03 | |||
MM03 | |||
Grounds | |||
G02 | |||
G03 | |||
G05 | |||
Circuit Description | |
The A/C control module receives input signals(for instance, photo sensor, AQS sensor, humidity sensor, evaporator sensor, ambient temperature sensor, etc) and controls the operation of air conditioning system. The A/C control module and various sensor signals provide accurate control of air mixture using blend door actuator, temperature actuator and intake actuator underall operating conditions. | The blower motor runs at the highest speed when the high blower relay coil energized through A/C control module. The function of the power transistor is that of the blower resister in manual A/C. The power transistor is controlled by the input currents appliedto the power transistor BASE terminal. |
