E08

DRL control module

E09

Right head lamp (W/O HID)

E11

Right HID turn signal lamp

E13

Left HID head lamp

E16

Right HID head lamp

E21

Left head lamp (W/O HID)

E23

Left HID turn signal lamp

M01-1

Multifunction switch

M08

Joint connector

M33-2

ETACM

M33-3

ETACM

M99

Joint connector

R01

Left rear combination lamp

R03

Right rear combination lamp

R11

Left license lamp

R12

Right license lamp

R13

Left inside lamp

R14

Right inside lamp

I/P-D

I/P-E

I/P-H

I/P-P

JE01

JM09

MI02

MR01

MR02

G01

G02

G03

G04

G08

G23

Circuit Description

Battery voltage is applied at all times to the coil and contacts of the tail lamp relay from tail lamp fuse. With the light switch in PARK or HEAD, the coil of the tail lamp relay is grounded through the ETACM (Without DRL)/DRL control module(With DRL). Battery voltage from fuse 31 and fuse 26 is then provided to the lamps (tail lamps, head lamps, inside lamps and license lamp) through the tail lamp relay contact and all the lamps go on.

There is a newly adopted system called tail lamp auto turn off system controlled by ETACM. When the light switch in PARK, the ignition switch is removed from the ignition key hole and the left front door opened, the ETACM calculates the condition and turn off the tail lamps automatically.