Item | Nm | Kg·cm | lb·ft |
Release bearing sleeve bolt Release fork shaft level nut Select lever Oil drain plug Poppet ball Clutch housing to transmission case Speedometer driven gear Reverse idler bolt Side cover bolt Shift control cable bracket Cylinder and hose assembly Shift lever bracket Front roll stopper bracket to subframe bolts Front roll stopper insulator bolt and nut Front roll stopper bracket to transaxle bolts Rear roll stopper bracket to subframe bolts Rear roll stopper insulator bolt and nut Rear roll stopper bracket to transaxle bolts Transaxle mounting sub bracket nut Transaxle mounting bracket bolts Transaxle mounting insulator bolt Front bearing retainer & detent body cover bolt | 6-8 27-40 20-27 30-35 35-42 35-42 3-5 43-55 10-12 20-27 15-22 9-14 60-80 50-65 60-80 50-65 50-65 60-80 60-80 60-80 90-110 15-22 | 60-80 270-400 200-270 300-350 350-420 350-420 30-50 430-550 100-120 200-270 150-220 90-140 600-800 500-650 600-800 500-650 500-650 600-800 600-800 600-800 900-1100 150-220 | 4-6 20-29 15-20 22-26 26-31 26-31 2-3 32-40 7-8 15-20 11-16 7-10 43-58 36-47 43-58 36-47 36-47 43-58 43-58 43-58 65-80 10-16 |
Model | M5GF1-1 | ||||
Type | Forward 5 speed, reverse 1 speed | ||||
Gear ratio First Second Third Fourth Fifth Reverse Final gear ratio | 2.0 DOHC 3.455 1.952 1.296 0.943 0.775 3.455 4.533 | 2.5 DOHC ← ← ← 0.971 0.821 ← 4.063 | |||
Item | Standard value | |
Differential side bearing end play Gear backlash in differential Input front bearing snap ring end play Input rear bearing snap ring end play Output rear bearing snap ring end play 5th input gear snap ring end play 3rd output gear snap ring end play | 0.05T - 0.10T (0.0019T - 0.0039T) 0.025L - 0.150L (0.00095L - 0.0057L) 0.01L - 0.12L (0.00038L - 0.0045L) 0.01L - 0.12L (0.00038L - 0.0045L) 0.05T - 0.10T (0.0019T - 0.0039T) 0.01L - 0.05L (0.00038L - 0.0019L) 0.01L - 0.05L (0.00038L - 0.0019L) | |
Item | Recommended lubricant | Quantity |
Transaxle gear oil lit (U.S. Imp.qts.) Transaxle input shaft spline Transaxle oil seal lip Transaxle case and clutch housing alignment surface Transaxle case and rear cover alignment surface Bearing retain bolt (flush bolt only) | HYUNDAI GENUINE PARTS MTF75W/90, API-GL4 CASMOLY L9508 RETINAX AM, MOLYTEX GREASE EP-2 THREE BOND 1216 THREE BOND 1216 THREE BOND1303 | 2.1 (2.2, 1.8) As required As required As required As required As required |
