2.
Check the pad thickness through the cylinder inspection hole. If the pad lining thickness is out of specification, replace the pads.
Standard value | Service limit | |
Pad lining thickness mm (in.) | 10.5 (0.413) | 2.0 (0.079) |
Remove the wheel and tire.
Check the pad thickness through the cylinder inspection hole. If the pad lining thickness is out of specification, replace the pads.
Standard value | Service limit | |
Pad lining thickness mm (in.) | 10.5 (0.413) | 2.0 (0.079) |
Remove two bolts from the carrier and remove the brake cylinder.
Remove the brake cylinder and suspend it with wire.
Do not disconnect the brake hose.
Remove the pads.
Be careful not to depress the brake pedal while disassembling the pads.
