If there are any regulations pertinent to the aiming of headlamps in the area where the vehicle is to be used, adjust soas to meet those requirements.
Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools.
The vehicle should be placed on a flat level surface.
Draw vertical lines (vertical lines passing through respective headlamp centers) and a horizontal line (horizontal line passing through center ofheadlamps) on a screen.
With the headlamp and battery in normal condition, aim the headlamps.
Make vertical and horizontal adjustments to the lower beam using the adjusting wheel.
With the front fog lamps and battery normal condition, aim the front fog lamps by using the adjusting wheel.
