1.
Disconnect the switch from harness side, floor console upper cover.
Disconnect the switch from harness side, floor console upper cover.
Connect the battery voltage between terminals 3 and 4(Reference voltage =VB).
Measure the voltage between terminals 2 and 3( V).
Check the percent ratio(V/VB x 100%) between voltages VB and V at each position.
Position No. | Rotation | Ratio(±5%) | Voltage(V) |
0 | 0° | 95.5% | 11.46 ± 0.5V |
1 | 30° | 83% | 9.96 ± 0.5V |
2 | 67° | 68.2% | 8.18 ± 0.5V |
3 | 100° | 55% | 6.60 ± 0.5V |
If the voltage is not as specified, replace the head lamp levelling switch.
