KEYS

ID KEY

Must be used first to register unique ID code in the ICM.

This ID code is then recorded into the master keys.

MASTER KEY

Once the ID code is recorded into the MASTER KEY, this key is for general use.

TRANSPONDER

(built-in-keys)

When ignition is ON , the coil supplies energy to the transponder, which in turn accumulates energy in the condenser.

Once the energy supplied from the coil has stopped, using the stored energy in the condenser, the transponder transmits the ID code.

COIL ANTENNA

Supplies energy to the transponder.

Receives signal from the transponder.

Sends transponder signal to the ICM.

IMMOBILIZER CONTROL MODULE

Supplies power to the coil antenna.

Receives and analyses signal from the coil antenna.

Transmits signal to ECM.

Stores VIN which is composed of ID code and password.

ENGINE CONTROL MODULE

In the ignition ON position, the ECM receives information from the ICM and permits injection to take place.

DATA LINK CONNECTOR

By connecting the voltmeter or Hi-scan, the control module diagnostic code can be read.

DIAGNOSTIC TESTER

Has the function of ICM, ECM, and keys diagnosis and change.