If a new compressor is installed, first adjust the amount of oil according to the procedures described below, and then install the compressor.
Measure the amount (X cm³) of oil inside the removed compressor.
Y cm³ indicates the amount of oil in the refrigerant line, the condenser, the cooling unit, etc.
When replacing the following parts at the same time as the compressor, subtract the rated oil amount of each part from Y cm³ and discharge thisamount from the new compressor.
Compressor oil: FD46XG (PAG OIL) |
Quantity: Evaporator: 30 cm³ (1.0 fl.oz.) Condenser: 40 cm³ (1.4 fl.oz.) Suction hose: 10 cm³ (0.3 fl.oz.) Receiver: 20 cm³ (0.6 fl.oz.) |
