Disassemble the cotter pin, washer, and clevis pin.
Disassemble the clutch pedal mounting bolt.
Check the pedal shaft and bushing for wear.
Check the clutch pedal for bending or torsion.
Check the return spring for damage or deterioration.
Check the pedal pad for damage or wear.
Remove the ignition lock switch and check for continuity between the terminals. If the continuity is not as specified, replace the switch.
Chassis grease : SAE J310a, NLGI No.1 |
Install the clutch pedal mounting bolt.
Wheel bearing grease : SAE J310, NLGI No.2 |
Install the push rod to the clutch pedal.
Adjust the clutch pedal clevis pin play.
Check the pedal shaft and bushing for wear.
Check the clutch pedal for bending or torsion.
Check the return spring for damage or deterioration.
Check the pedal pad for damage or wear.
Remove the ignition lock switch and check for continuity between the terminals. If the continuity is not as specified, replace the switch.
