D03

Driver door module #1

D04

Driver door module #2 (W/O IMS)

D05

Driver door module #2 (Wtih IMS)

D12

Joint connector

D13

Joint connector

D19

Left outside mirror motor & Folding motor

D20

Right outside mirror motor & Folding motor

D25

Left IMS mirror motor (With IMS)

D26

Right IMS mirror motor (With IMS)

D27

IMS switch

D28

Assister door module #1

D29

Assister door module #2 (W/O IMS)

D30

Assister door module #2 (With IMS)

M33-1

ETACM

M110-3

IMS control module

I/P-E

MD01

MD02

MM04

MM14

G03

G05

Circuit Description

Without IMS

The operation of the two outside mirrors is controlled by the power outside mirror switch in the Driver/ Assister door module. Each mirror has two reversible motors: One motor moves the mirror up and down, the othermotor moves the mirror left and right.

With the ignition switch in ACC or ON, battery voltage is applied from fuse 16 to the Driver/ Assister door module. With the master selector switch in LEFT and the up/down switch in UP, battery voltage is applied to the left outside mirror up/down motor through the driver door module. In the DOWN position, battery voltage and ground are applied to the opposite sides ofthe motor through the driver door module.

The left/right switch works similarly to the up/down switch. With the master selector switch in the RIGHT position, battery voltage and ground are applied to the right outside mirror motor through the assister door modulewhich then operate in a similar way.

With IMS

The power outside mirrors can be controlled by manual switch. In this case, the operations of the power outside mirrors are same as that of thenormal(without IMS) power outside mirrors.

If the position of the outside mirrors are adjusted and memorized in the IMS control module, power outside mirrors can be operated automatically. When the ignition switch in ACC or ON and "1" or "2" button pushed, the memorizedposition is adjusted automatically.