Remove the front door scuff trim and rear door scuff trim.
Remove the center pillar lower trim.
Remove the front seat belt upper anchor mounting bolt and pry loose the center pillar upper trim.
Tightening torque |
Front seat belt upper anchor mounting bolt ; |
40-55 Nm (400-550 kg·cm, 29-40 lb·ft) |
Remove the cowl side trim.
Pry loose the front pillar trim with a flat-bladed screwdriver.
To remove the rear package tray trim, first remove the following parts :
Rear seat cushion
Rear seat back
Luggage partition trim
High mounting stop lamp
Pry loose the rear pillar trim with a flat-bladed screwdriver.
To remove the headliner first remove the following parts :
Front and rear roof assist handle
Map lamp, room lamp, overhead console lamp
Sun visor and sun visor retainer
Front pillar trim, center pillar trim, rear pillar trim.
Installation is the reverse of removal.
