8.
Remove the front bumper rail after removing the mounting nuts.
Tightening torque |
Bumper rail mounting nuts ; |
9-28 Nm (90-280 kg·cm, 6.5-10.1 lb·ft) |
Remove the head lamp and disconnect the head lamp connector.
Remove the front bumper cover upper mounting nut.
Remove the front bumper cover retainer in the upper side and lower side.
Remove the front bumper center mounting screws.
Remove the front bumper cover mounting screw in the corner of front bumper.
Remove the front bumper cover.
After removing the energy absorber mounting screws, remove the energy absorber.
Remove the front bumper rail after removing the mounting nuts.
Tightening torque |
Bumper rail mounting nuts ; |
9-28 Nm (90-280 kg·cm, 6.5-10.1 lb·ft) |
Installation is the reverse of removal.
