Remove the lower crash pad assembly (Refer to Body Group)

Remove the brake pedal return spring.

Remove the steering support member.

Remove the stop lamp switch and disconnect the shift lock cable (Only for vehicle equipped with automatic transaxle control system).

Remove the cotter pin and clevis pin.

Detach the stopper and washer from the pedal support member on the right side.

Loosen the booster mounting nut and remove the pedal support member on the right side.

Remove the brake pedal to the driver's compartment. Remove the pedal rod bushing and wave washer.

Loosen the pedal support member installation bolt and nut, then remove the pedal support member on the left side .