REASSEMBLY
1.

Check for worn, damaged, or rusted piston bore and piston. Replace the damaged parts if necessary.

2.

Check for damaged piston seal, boot and pin insulators.

3.

Apply the recommended fluid to the following parts.

Parts

Recommended fluid

Quantity

Piston seal

Brake fluid

(Dot 3 or Dot 4)

As required

Cylinder inner side

Brake fluid

(Dot 3 or Dot 4)

As required

Piston boot

Brake fluid

(Dot 3 or Dot 4)

As required

Piston outer surface

Brake fluid

(Dot 3 or Dot 4)

As required

Guide-rod insulators

Rubber grease

As required

4.

Push the piston into the caliper.

5.

Position the piston matchmars on the upper side so that they are located in a straight line with the piston.

Яндекс.Метрика