Sweden, Finland, Estonia | Norway, Iceland, Denmarks |
![]() | ![]() |
Disconnect the wire connector to DRL module from engine compartment.
Inspect the connector on wire harness side as shown.
Check For | Test Connect | Condition | Test Specification | |
Continuity | 5-Ground | Head lamp switch | OFF | No continuity |
ON | Continuity | |||
6-Ground | Constant | Continuity | ||
9-Ground | Dimmer&passing switch | Head light ON | Continuity | |
Head light OFF | No continuity | |||
Voltage | 9-Ground | Ignition switch | ON | Battery voltage |
ACC or LOCK | No voltage | |||
5-Ground | Ignition switch | ON | Battery voltage | |
ACC or LOCK | No voltage | |||
7-Ground | Constant | Battery voltage | ||
3-Ground | Engine | Stop | No voltage | |
Running | Battery voltage |
If circuit is not as specified, refer to schematic diagram and inspect short or circuits.