| Sweden, Finland, Estonia | Norway, Iceland, Denmarks | 
|  |  | 
Disconnect the wire connector to DRL module from engine compartment.
Inspect the connector on wire harness side as shown.

| Check For | Test Connect | Condition | Test Specification | |
| Continuity | 5-Ground | Head lamp switch | OFF | No continuity | 
| ON | Continuity | |||
| 6-Ground | Constant | Continuity | ||
| 9-Ground | Dimmer&passing switch | Head light ON | Continuity | |
| Head light OFF | No continuity | |||
| Voltage | 9-Ground | Ignition switch | ON | Battery voltage | 
| ACC or LOCK | No voltage | |||
| 5-Ground | Ignition switch | ON | Battery voltage | |
| ACC or LOCK | No voltage | |||
| 7-Ground | Constant | Battery voltage | ||
| 3-Ground | Engine | Stop | No voltage | |
| Running | Battery voltage | |||
If circuit is not as specified, refer to schematic diagram and inspect short or circuits.