2.
When connecting the filler hose, connect the end with the shorter straight pipe to the tank side.
Connect the leveling hose to the tank at approximately 40 mm (1.6 in.) of the filler neck.
When connecting the filler hose, connect the end with the shorter straight pipe to the tank side.
Confirm that the pad is fully bonded to the fuel tank. Install the fuel tank by tightening the self-locking nuts to the tank bands until the rearend of the tank band contacts the body.
Connect the vapor hose and return hose. Attach the fuel hose to the line as shown in the illustration.
Tightening torque High pressure hose flare nut : |
30~40 Nm (300~400 kg·cm, 22~29 lb·ft) |
When tightening the flare nut, be careful not to bend or twist the line to prevent damage to the fuel pump connection.
Connect the electrical fuel pump assembly connector.
