Engine coolant temperature sensor | LOCTITE 962T or equivalent |
Item | Nm | Kg·cm | lb·ft |
Delivery pipe installation bolt Engine coolant temperature sensor Heated oxygen sensor Heated oxygen sensor connector bracket bolt Fuel pressure regulator installation bolt High pressure hose and fuel main pipe High pressure hose and fuel filter High pressure hose to delivery pipe Fuel pump assembly to fuel tank High pressure hose at fuel tank Throttle body to surge tank Fuel tank drain plug Fuel filter mounting bolts Accelerator arm bracket bolts ISC motor (stepper motor) Fuel sender to fuel tank | 10 ~ 13 20 ~ 40 40 ~ 50 8 ~ 12 7 ~ 11 30 ~ 40 25 ~ 35 3 ~ 4 2 ~ 3 30 ~ 40 10 ~ 13 15 ~ 25 9 ~ 14 8 ~ 12 2.5 ~ 4.5 2 ~ 3 | 100 ~ 130 200 ~ 400 400 ~ 500 80 ~ 120 70 ~ 110 300 ~ 400 250 ~ 350 30 ~ 40 20 ~ 30 300 ~ 400 100 ~ 130 150 ~ 250 90 ~ 140 80 ~ 120 25 ~ 45 20 ~ 30 | 7 ~ 9 14 ~ 29 29 ~ 36 5.8 ~ 8.7 5 ~ 8 22 ~ 29 18 ~ 25 2.2 ~ 3 1.4 ~ 2.2 22 ~ 29 7.2 ~ 9 11 ~ 18 6.5 ~ 10 5.8 ~ 8.7 1.8 ~ 3.3 1.4 ~ 2.2 |
Actual ignition timing | BTDC 5° ± 2° | ||
Curb idle speed | N-range | A/CON : OFF | 700 ± 100 |
A/CON : ON | 850 ± 100 | ||
D-range | A/CON : OFF | 680 ± 100 | |
A/CON : ON | 680 ± 100 | ||
Fuel tank Capacity | 70 lit. (18.5 U.S.gal., 15.4 lmp. gal.) |
Fuel filter Type | High pressure type |
Fuel pump Type Driven by | Electrical, in-tank type Electric motor |
Throttle body Throttle position sensor (TP Sensor) Type Output voltage at curb idle Output voltage at WOT Idle speed control (ISC) motor Type Resistance Idle position switch Type | Variable resistor type 0.3 ~ 0.9V (Step motor type) 4.0 ~ 4.7V (ETS type) 4.5 ~ 5.0V (Step motor type) 0.1 ~ 1.0V (ETS type) ETS (Electric throttle system) 28 ~ 32Ω at 20°C (68°F) Contact type (Built in TPS) |
Input sensor Mass air flow sensor Type Intake air temperature (IAT) sensor Type Resistance Engine coolant temperature (ECT) sensor Type Resistance Heated oxygen sensor (HO2S) Type Vehicle speed sensor Type Camshaft position (CMP) sensor Type Crankshaft position (CKP) sensor Type | Hot film type Thermistor type 2.33 ~ 2.97kΩ or 2.5 ~ 2.7V at 20°C (68°F) 0.31 ~ 0.43kΩ or 0.6 ~ 0.8V at 80°C (176°F) Thermistor type 2.4kΩ or 2.5 ~ 2.7V at 20°C (68°F) 0.3kΩ or 0.5 ~ 0.7V at 80°C (176°F) Zirconia sensor Hall IC type Hall effect sensor Hall effect sensor |
Output actuator Injector Type Number Coil resistance | Electromagnetic type 6 13 ~ 16Ω at 20°C (68°F) |
Fuel pressure regulator Fuel pressure | 320 ~ 340kPa (3.26 ~ 3.47kg/cm², 46 ~ 49 psi) |
