1.
Remove the radiator fan motor relay (High and Low) from the relay box in the engine room.
Disconnect the ground cable from the battery cable.
Disconnect the connectors from the fan motor and the harness from the shroud.
For vehicles with automatic transaxles, remove the oil cooler hose from the shroud.
Remove the four bolts holding the shroud.
Remove the shroud with the fan motor.
Remove the fan mounting clip and detach the fan from the fan motor.
Remove the three screws and detach the fan motor.
Make sure the cooling fan does not come into contact with the shroud when installed.
After installation, make sure there is no unusual noise or vibration when the fan is rotating.
Check that the radiator fan rotates when battery voltage is applied between the terminals.
Check that there are no abnormal noises while the motor is running.
Remove the radiator fan motor relay (High and Low) from the relay box in the engine room.
Check to be sure that the radiator fan rotates when battery voltage is applied between the terminals (as shown table below).
Check to see that adnormal nioses are not produced while the motor is turning.
