Component Location
General Description

Alternator output and power demand of all electrical loads and systems must be matched to each other as ideally as possible so that the entire system is reliable and trouble-free in operation. The ECM monitors alternator output deviation from the signal of the FR terminal of the alternator when the engine is running

DTC Description

ECM sets DTC P0626 if the ECM detects output duty signal higher than the possible range of a properly operating alternator

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Electrical Check

● Open or short to ground in harness

● Faulty charging system

Enable Conditions

● Time after ignition ON > 0.1sec.

● Engine speed=0

● No relevant failure

Threshold Value

● Alternator load > 35%

Diagnostic Time

● 1 sec.

MIL On Condition

● -

Schematic Diagram
Signal Waveform
Яндекс.Метрика