1.
Remove the cover (A).
When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Remove the cover (A).
After loosening the mounting screw, then remove the knob (A).
Remove the under cover (A).
Disconnect the connector (B).
Gently detach the hook, remove the parking brake cover (A).
After loosening the console mounting screws, remove the floor console assembly (A).
Installation is the reverse of removal.
Make sure the connector is plugged in properly.
Replace any damage clips.
Remove the console extenser cover (A).
Installation is the reverse of removal.
