3.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
When installing the belt, make sure not to damage thepretensioner.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
Remove the following items fist.
Front seat assembly.
Door scuff trim.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
Remove the center pillar lower trim.
Remove the center pillar upper trim .
Remove the upper anchor (A).
After disconnecting the pretensioner connector lock pin, Loosen the mounting bolt, then remove the pretensioner (C).
When installing the belt, make sure not to damage thepretensioner.
Remove the following items first.
Rear seat assembly.
Rear door scuff trim.
Rear filler trim.
Remove the lower anchor (A).
After loosening the retractor (C) mounting bolt,remove the rear seat belt (B).
Remove the front seat assembly.
Remove the wire harness of buckle from seat.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
Remove the rear seat cushion
Remove the seat belt buckle (A).
Installation is the reverse of removal.
Remove the following items first.
Front seat assembly.
Door scuff trim.
Front seat belt.
Center pillar trim.
After loosening the mounting bolt, then remove the height adjuster (A).
Installation is the reverse of removal.
