2.
Remove the rear upper arm (C) by loosening the mounting bolts ＆ nut (A, B).
Remove the rear wheel ＆ tire.
Be careful not to damage to the hub bolts when removing the rear wheel ＆ tire.
Remove the rear upper arm (C) by loosening the mounting bolts ＆ nut (A, B).
Install the rear upper arm (C) between the rear cross member and the carrier assembly and then tighten the mounting bolts and nut (A, B).
Tightening torque Nm (kgf.m, lb-ft)
Bolt (A): 100 ~ 120 (10.0 ~ 12.0, 72 ~ 87)
Bolt ＆ Nut (B): 100 ~ 120 (10.0 ~ 12.0, 72 ~ 87)
Install the rear upper arm so that the letter "R" can face the rear of vehicle.
Install the rear wheel ＆ tire.
Tightening torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)
Check the bushing for wear and deterioration.
Check the rear upper arm or damage and deformation.
Check for all bolts and nut.
