2.
Remove the fuel filler door cap (A).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Open the fuel filler door.
Remove the fuel filler door cap (A).
Pull out the fuel filler door cable (A) by pushing the lock pin.
Remove the fuel filler door open switch (A) by pushing the both lock pins.
Remove the clips (A).
Remove the fuel filler door housing (B) by inserting the screwdriver (A) into the gap between the housing and body panel.
Slightly pull out the packing part (C) inside of the housing before removing the fuel filler door housing.
Be careful not to tear the housing.
Slightly pry up the lock pin (A) using a flat head screwdriver and remove the fuel filler door (B) by pulling it in the direction of the arrow.
Be careful not to damage the lock pin.
Reinstall all removed parts in the reverse order of removal.
Make sure the fuel filler door locks/unlocks and opens/closes properly.
