2.
Remove the driver airbag module.
(Refer to the Airbag group - Airbag module and clock spring).
Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to the Airbag group - Airbag module and clock spring).
Disconnect the audio remote control switch connector(A).
Remove the steering wheel after loosening the nut(B) and disconnecting the connector(A).
(Refer to the Steering group - Steering column and shaft).
Remove the steering wheel lower cover after loosening the 4 screws.
Loosen the screws (4EA) on the opposite side of the steering wheel.
Remove the audio remote control switch (A).
Install the audio remote control switch on the steering wheel.
Install the steering wheel.
Connect the audio remote control switch connector.
Install the driver airbag module.
Check for resistance between No.2 and No.3 terminals in each switch position.
Switch | Connector terminal | Resistance (±1%) |
SEEK UP | 2-3 (Left) | 0 Ω |
SEEK DOWN | 2-3 (Left) | 1.8 kΩ |
CH UP | 2-3 (Left) | 3.6 kΩ |
CH DOWN | 2-3 (Left) | 5.4 kΩ |
MUTE | 2-3 (Right) | 0 Ω |
MODE | 2-3 (Right) | 4.7 kΩ |
VOL. UP | 2-3 (Right) | 14.7 kΩ |
VOL. DOWN | 2-3 (Right) | 26.7 kΩ |
Switch | Connector terminal | Resistance (±1%) |
SEEK UP | 2-3 (Left) | 0 Ω |
SEEK DOWN | 2-3 (Left) | 1.8 kΩ |
CH UP | 2-3 (Left) | 3.6 kΩ |
MODE | 2-3 (Left) | 14 kΩ |
VOL. UP | 2-3 (Left) | 24 kΩ |
VOL. DOWN | 2-3 (Left) | 36 kΩ |
