13143357

INSPECTION

Disconnect the negative(-) battery terminal.

Remove the ICM relay box.

DOOR LOCK

Check for continuity between the terminals.

There should be continuity between the No.15 and No.6(or 16) terminals when power and ground are connected to the No.15 and No.17 in the ICM-B.

There should be no continuity between the No.15 and No.6(or 16) terminals when power is disconnected.

DOOR UNLOCK

Check for continuity between the terminals.

There should be no continuity between the No.15 and No.4(or 14) terminals when power and ground are connected to the No.12 and No.15 in the ICM-B.

There should be continuity between the No.15 and No.4(or 14) terminals when power is disconnected.

BURGLAR ALARM HORN

Check for continuity between the terminals.

There should be continuity between the No.11 and No.12 terminals when power and ground are connected to the No.3 and No.11 in the ICM-A.

There should be no continuity between the No.11 and No.12 terminals when power is disconnected.

FRONT DEICER

Check for continuity between the terminals.

There should be continuity between the No.1 and No.10 terminals when power and ground are connected to the No.2 and No.10 terminals in the ICM-A.

There should be no continuity between the No.1 and No.10 terminals when power is disconnected.

REAR FOG LAMP

Check for continuity between the terminals.

There should be continuity between the No.2(or 10) and No.11 terminals when power and ground are connected to the No.9(or 10) and No.11 terminals in the ICM-B.

There should be no continuity between the No.2(or 10) and No.11 terminals when power is disconnected.

RAIN SENSOR

Check for continuity between the terminals.

There should be continuity between the No.9 and No.16 terminals when power and ground are connected to the No.8 and No.18 terminals in the ICM-A.

There should be no continuity between the No.9 and No.16 terminals when power is disconnected.

DEAD LOCK

Check for continuity between the terminals.

There should be continuity between the No.5 and No.14 terminals when power and ground are connected to the No.7 and No.14 terminals in the ICM-A.

There should be no continuity between the No.5 and No.14 terminals when power is disconnected.