Monitor Scantool Data
1.

Park the vehicle on a level surface.

2.

Set up 'GDS' with 'GDS TPMS'.

3.

Drive vehicle at a steady speed for more than 1minmute.

4.

Select the "CURRENT DATA" function of "TPMS" system.

5.

Select the "FULL" mode of "CURRENT DATA" function.

6.

Monitor the parameters related to 'Rear Right WE sensor(Sensor 3)'.

1)

Specification : the parameters related to 'Rear Right WE sensor' are displayed normally.

Fig.1) Sensor current data (normal)

7.

Are the parameters normal?

▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet.

▶ Go to "Verification of vehicle Repair" procedure.

▶ Replace Rear Right WE sensor and register sensor ID with 'GDS TPMS'.

▶ Go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика