3.
Open the service cover (A) after unscrewing the 4 screws.
Turn ignition switch off.
Remove the second seat (Refer to "BD" group in this WORKSHOP MANUAL).
Open the service cover (A) after unscrewing the 4 screws.
Disconnect the fuel sender connector (A), the fuel feed tube quick-connector (B), the return tube quick - connector (C).
Remove the cover seal (D).
Remove the fuel sender assembly after unscrewing the installation bolts.
Install the fuel pump assembly according to the reverse order of "Removal" procedure.
Fuel sender installation bolts. 3.9 ~ 5.8 N.m (0.4 ~ 0.6 kgf.m, 2.8 ~ 4.4 lbf.ft)
