2.
Put the SST (09840-1E100) (A) into the space between the center fascia and crash pad.
note
●
Be care not to damage the center facia and crash pad.
Disconnect the battery negative cable from the battery.
Put the SST (09840-1E100) (A) into the space between the center fascia and crash pad.
Be care not to damage the center facia and crash pad.
Separate the center facia panel from the crash pad pulling the SST (09840-1E100) (A) as shown on the photo.
Pull the SST (09840-1E100) (A) slowly not to damage the center fascia panel.
Pull the other side of center facia panel with the SST (09840-1E100) in the way of "step 2)".
Remove the center facia lower tray (A).
Remove the malfunctioning part and fit new part.
Reinstall the center facia lower tray.
Connect the battery negative cable to the battery.
Perform the VIN and Vehicle name writing procedure. (Refer to VIN and Vehicle name writing.)
Perform the sensor registration procedure. (Refer to Sensor registration.)
