Engine type | Diesel 1.6 | |
Transaxle type | M5CF3 | |
Gear ratio | 1st | 3.636 |
2nd | 1.962 | |
3rd | 1.189 | |
4th | 0.844 | |
5th | 0.660 | |
Reverse | 3.583 | |
Final gear ratio | 3.941 | |
Items | Standard value [in(mm)] |
Input shaft rear bearing end play | 0.00-0.0019L(0.00-0.05L) |
Output shaft bearing end play (At 70kgf load) | 0.00-0.0019T(0.00-0.05T) |
Input shaft front bearing end play | 0.00-0.0019L(0.00-0.05L) |
Differential bearing end play (At 70kgf load) | 0.0059T-0.0078T(0.15T-0.20T) |
Differential pinion backlash | 0.0039L MAX(0.1L MAX) |
T: Indicate tightening of -(minus) direction of end play
L: Indicate loosening of +(plus) direction of end play
Standard value | Nm | kgf.m | lb-ft | |
Oil drain plug | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Oil filler plug | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Shift control cable bracket on transaxle side | 20-27 | 2.0-2.7 | 14.5-19.5 | |
Rear roll support bracket bolt | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Front roll support bracket bolt | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle support bracket bolts | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle mounting bracket bolts | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Clutch release lever fulcrum bolt | 55-60 | 5.5-6.0 | 39.8-43.4 | |
Transaxle upper mounting bolts | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle lower mounting bolts | TM → ENG | 43-55 | 4.3-5.5 | 31.1-39.8 |
ENG → TM | 30-42 | 3.0-4.2 | 21.7-30.4 | |
Always follow torque tightening levels. Failure to follow such levels can result in parts breaking if over-tightened or loosening if under-tightened. In either case, serious personal injury or death could result to vehicle occupants.
Items | Recommnend lubricant | Quantity |
Transaxle gear oil | SAE 75W/85 API GL-4 TGO-7(MS517-14) ZIC G-F TOP 75W/85 HD GEAR OIL XLS 75W/85 | 2.0ℓ(2.1US qt, 1.76lmp qt) |
Air Breather | MS721-38 | As requried |
Transaxle housing | MS721-40 or MS721-38 | As requried |
Surface of release fork and bearing | Grease (CASMOLY L9508) | As requried |
