3.
Measure resistance of FTS component terminal 1 and 2, referring to resistance characteristic table of specification of General information.
1)
Specification : Refer to Specification of General Information.
IG KEY "OFF", ENGINE "OFF".
Disconnect FTS connector.
Measure resistance of FTS component terminal 1 and 2, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information.
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
YES
Go to "Verification of Vehicle Rapair"
NO
Replace FTS and go to "Verification of Vehicle Rapair".
