4.
Monitor "AIR MASS PERCYLINDER" parameter on the Scantool.
1)
Specification : When EEGR actuator does not operate 5% duty) at idle : 410mg/st ± 50 mg/st
When EEGR actuator operates(Approx. 45% duty) at idle : 360mg/st ± 50 mg/st
Connect Scantool to Data Link Connector (DLC).
Warm engine up to normal operating temperature.
Turn "OFF" electrical devices and A/C.
Monitor "AIR MASS PERCYLINDER" parameter on the Scantool.
Specification : When EEGR actuator does not operate 5% duty) at idle : 410mg/st ± 50 mg/st
When EEGR actuator operates(Approx. 45% duty) at idle : 360mg/st ± 50 mg/st
