3.
Measure resistance between EGTS(T5-CPF) terminal 1 and terminal 2.
1)
Specification : Refer to Specification of General Information
IG KEY "OFF", ENGINE "OFF".
Disconnect EGTS(T5-CPF) connector.
Measure resistance between EGTS(T5-CPF) terminal 1 and terminal 2.
Specification : Refer to Specification of General Information
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
YES
Go to "Verification of Vehicle Repair".
NO
Replace EGTS(T5-CPF) and go to "Verification of Vehicle Repair".
