4.
Drive the vehicle
Specification : Increasing Gradually
Fig 1) P,N
Fig 2) "1st" grar
Fig 3) "2nd" gear
Fig 4) "3rd" gear
Fig 5) "4th" gear
Connect GDS to data link connector(DLC)
Engine "ON" .
Monitor the "INPUT SPEED SENSOR" parameter on the GDS.
Drive the vehicle
Specification : Increasing Gradually
Fig 1) P,N
Fig 2) "1st" grar
Fig 3) "2nd" gear
Fig 4) "3rd" gear
Fig 5) "4th" gear
Does "input speed sensor " follow the referance data?
 | ▶ Fault is intermittent caused by poor contact in the sensor's and/or TCM(PCM)'s connector or was repaired and TCM(PCM) memory was not cleared. Throughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage.Repair or replace as necessary and go to "Verification Vehicle Repair" procedure. |
 | ▶ Go to "W/Harness Inspection" procedure. |
