3.
Monitor the "KEY STATUS","SMARTRA STATUS" and "ECU STATUS＇ Parameter on the Scantool.
Connect scantool to Data Link Connector(DLC).
IGN "ON" & Engine "OFF"
Monitor the "KEY STATUS","SMARTRA STATUS" and "ECU STATUS＇ Parameter on the Scantool.
Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS＇ Parameter within specifications?
YES
Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
Go to "Inspection & Repair" procedure
