3.
Measure voltage value between terminal "2" and "3" of AQS sensor
1)
Specification : Refer the specifications in fig3)
Engine "ON".
Connect AQS sensor.
Measure voltage value between terminal "2" and "3" of AQS sensor
Specification : Refer the specifications in fig3)
Is the measured voltage within specifications in fig3)?
YES
Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
Substitute with a AQS sensor and check for proper operation. If the problem is corrected, replace AQS sensor and then go to "Verification of Vehicle Repair" procedure.
