6531706

Check actuator motor

(1)

Ignition "OFF".

(2)

Disconnect DR Direction(FLOOR) Actuator.

(3)

Connect (+) terminal of battery to terminal 3 of Direction Actuator and (-) terminal to terminal 4.

(4)

Verify that the Air mix actuator(Temperature actuator) operates to the "Close" or "Open" position.

(5)

Dose the actuator work properly?

YES

Go to "Check potentiometer" procedure.

Substitute with a known-good actuator and check for proper operation. If the problem is corrected, replace actuator and then go to "Verification of Vehicle Repair" procedure.

Check actuator potentiometer

(1)

Ignition "ON".

(2)

Connect DR Direction(FLOOR) Actuator.

(3)

Measure voltage between terminal "5" and "6" of DR Direction Actuator while operating direction switch.

Specification : Refer the specifications in fig3)

(4)

Is the measured voltage within specifications in fig3)?

YES

Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Substitute with a known-good actuator and check for proper operation. If the problem is corrected, replace actuator and then go to "Verification of Vehicle Repair" procedure.